“Demiplus automatic water demineralisation equipment by ion exchange resins environmental sustainability efficiency”

en / spirits / aeb engineering – equipment / water treatment / demiplus

DEMIPLUS

WATER DEMINERALISATION PLANT BY PASSAGE OVER RESIN TO ENSURE AN ION EXCHANGE

The demineralisation of the water is obtained by means of ion-exchange resins: the water passes through the resins and is softened in a single step at a predetermined speed such as to completely remove the ions present. Once exhausted, the resins are regenerated automatically with Acid+ Demi and Alca-.

RESIN REGENERATION

Resin regeneration is controlled by reading the conductivity of the water with cycles and times that can be programmed via an eprom memory. The matrices of the cationic and anionic resins used are of the macroporous polystyrene type with strong cross-linking and high exchange capacity, resistant to oxidation and to osmotic pressures. They are specifically designed to produce water with low conductivity and have a uniform grain size to minimise pressure losses and maximise cycling.

BENEFITS

Total use of the water to be softened
Maximum saving of water resources and minimum environmental impact
Use of specific resins for water
Automatic management via control unit

RANGE

The range includes two models: Demiplus 50 and Demiplus 150.

DEMIPLUS 50

VESSEL

Two made of fibreglass each with 50 kg of resin

HOURLY PRODUCTION

Up to 2,000 L/hour of demineralised water

TOTAL PRODUCTION PER CYCLE

Approx. 3000 L in 3 hours 45 minutes*
DEMIPLUS 150

VESSEL

Two made of fibreglass each with 150 kg of resin

HOURLY PRODUCTION

Up to 4,000 L/hour of demineralised water

TOTAL PRODUCTION PER CYCLE

Approx. 9,000 L in 3 hours 40 minutes *