Form loader label

E-FLOT

DYNAMIC MUST CLARIFICATION SYSTEM

The range of E-Flot flotation equipment, designed by AEB ENGINEERING, allows the optimisation of the clarification of the must. With the help of E-Flot, the winemaker will be able to achieve faster clarification, reducing the energy expenditure in the winery thanks to a limited use of cooling systems.

ADVANCED TECHNOLOGIES FOR AUTOMATION IN THE WINERY

AEB ENGINEERING is the division specialised in the production of plants and equipment which, thanks to its know-how and to its 100% internal and on-site production, guarantees the highest quality and reliability of the AEB technologies. The uniqueness of AEB ENGINEERING is given by the constant support of our technicians, both during installation and after sales. For an unparalleled service that is flexible and tailored to the customer needs.

BENEFITS

  • Reduced clarification time
  • Energy saving in terms of refrigeration used for the cooling of the must
  • Limited use of gas
  • Adequate use of adjuvants
  • Significant reduction of the lees residues
  • High versatility

RANGE

The range includes a number of models:

 

  • MODEL
     

    E-FLOT 5

    E-FLOT 10

    E-FLOT 25

    E-FLOT 50

    E-FLOT 80

    E-FLOT CNT

    E-FLOT 130

     

    FLOW RATE (hL/h)

    50 hL/h

    120 hL/h

    250 hL/h

    500 hL/h

    800 hL/h

    150-300 hL/h

    1000-1300* hL/h

     

    FLOW RATE WITH POST-PUMP GAS DOSING (hL/h)

    70 hL/h

    150 hL/h

    320 hL/h

    700 hL/h

    1000 hL/h

      -  

    1200-1500* hL/h

     

    DIMENSIONS (cm)

    60X45X80

    60X45X80

    80X65X130

    120X80X180

    120X100X180

    120X110X180

    130X210X220

     

    WEIGHT (Kg)

    50

    110

    130

    220

    350

    350

    500

*Proportion the size of the tubes.
For detailed information on each model, refer to the relevant technical data sheet.

RANGE

I modelli della gamma Stabymatic sono:

 

  • MODEL

    E-FLOT 5

    E-FLOT 10

    E-FLOT 25

    E-FLOT 50*

    E-FLOT 80*

    E-FLOT 50 CNT

    E-FLOT 130

     

     
    FLOW RATE hL/ora

    50 hL/h

    120 hL/h

    250 hL/h

    500 hL/h

    800 hL/h

    150-300 hL/h

    1000-1300* hL/h

*Proportion the size of the tubes.
For detailed information on each model, refer to the relevant technical data sheet.

E-FLOT CNT: SYSTEM TO ADAPT THE NEW FLOTATION TECHNOLOGY TO CONTINUOUSLY OPERATING SYSTEMS

This special model has been designed to be integrated into standard continuous pool flotation systems and completely replaces the saturation unit.

OPERATION

Clarification of musts by means of the E-Flot system uses the principle of incorporating a gas into the solids that constitute the turbidity in the liquid. The gas binds to the suspended particles, which then float towards the surface of the tank, leaving the lower part of the tank clear. For this process to take place, the must has to be fully depectinised.

For this purpose, a specific enzyme such as Endozym E-Flot is recommended. It has the properties of rapid action combined with the ability to completely degrade all components in the colloid. In order to obtain optimal flotation, i.e., an improved must clarity and a clearer diminution in turbidity, we suggest using E-Gel, which will allow the formation of flocs of a consistency to ensure that all unnecessary particles are incorporated. Other clarifiers such as bentonite or silica sol can be used if the desire is to obtain a must deproteinization or the elimination of the carbon in suspension before the fermentation.

E-Flot’s highly versatile nature derives from its patented usage options which allows both the introduction of the gas into the pump inlet to produce exceptionally clear musts, and the dosing of the gas at the outlet, which considerably increases the hourly flow rate.

“Centrifugal pump of the E-Flot flotation unit”

Centrifugal pump specifically for flotation

“Detail of the E-Flot saturator”

Saturator

“Detail of the PLC touch screen of the E-Flot machine”

PLC touch screen

“Detail dosage pump for flotation with E-Flot”

Flotation adjuvant dosing pump

“Micrometer valve of the E-Flot equipment”

Micrometer valve

“E-Flot nitrogen managing unit”

Nitrogen management unit

“Safety valve with pressure gauge and sample probe of the E-Flot”

Safety valve with pressure gauge and sample probe

DOCUMENTATION

Download

E-FLOT
Do you want to be always informed of all the news, initiatives and events of the Group? Subscribe now to our newsletter!
Subscribe the Newsletter